Description
Whacheon 18″ x 59″ Lathe, HL-460
Inventory # 8267
Model: HL-460-1500
Made in Korea to Japanese Standards
Specifications:
Capacity:
Swing Over Bed: 18.11″
Swing Over Cross Slide: 11.02″
Swing Over Gap: 26.77″
Distance Between Centers: 59.05″
Spindle:
Spindle Nose: A1-6″ or D1-6″
Spindle Bore: 2.04″
Taper of Spindle Bore: M.T. #6
Taper of Center: M.T. #4
No. of Spindle Speeds: 12
Range of Spindle Speeds: 32 – 1,800 RPM
Carriage:
No. of Feed Changes: 40 Steps
Longitudinal Feed (Z-Axis): 0.0018″ ~ 0.0288″ /Rev.
Cross Feed (X-Axis): 0.0018″ ~ 0.0288″ /Rev.
Cross Slide Travel: 10.03″
Compound Rest Travel: 5.90″
Bite Holder Size: 0.98″ x 0.98″
Threads:
Lead Screw: 1.49″ x 0.23″
Inch Threads: 80 ~ 4 TPI
Metric Threads: 0.0098″ ~ 0.55″
D.P. Threads: 8 ~ 112
Module Threads: 0.25 ~ 3.5
Tail Stock:
Spindle Travel: 5.90″
Taper of Center: M.T. #4
Bed:
Width: 13.77″
Length: 99.60″
Motors:
Coolant Pump: 0.13 HP
Main Motor: 7.37 HP
Standard Features:
Number (12 steps) and range of speeds of this lathe is created so that the most suitable cutting speed may be given to any size of workpiece diameter within the possible range of cutting size, namely, within the range of swing over bed
The main spindle is supported at the three points by precision bearings and its hole is generously sized. Automatic forced lubrication system supplies lubricant to every sliding-way and driving mechanism inside the headstock
By lubricating device installed inside apron, automatic lubrication is provided between carriage slide ways and bedways
An adjustable carriage feed stop dog is provided on bed as well as a positive micrometer stop
Number of feed changes (40 different kinds) and thread cutting are widely selective by lever operations
The machine is equipped with an overload safety device for feeding and thread cutting
Hydraulic copying attachment, taper-cutting attachment and rear tool post are easily attached by means of carriage grooves on both sides
Cross feed screws always supply a proper quantity of grease more than one time per week for maintaining smooth travel under maximum accuracy
Bed is designed to prevent torsion, side-wall is double wall and rib type
Hardened and ground bedways are made of high tensile cast iron. Produced under the license of UK Meehanite Know-How
Lower portions of bed casting are box shaped and are full length, forming the legs, chip pan, and coolant reservoir
The hydraulic disk brake provides safe quick braking of the spindle without generation of heat in the headstock
Gap bed and non-gap bed are available upon request
Standard Equipment:
Coolant Pump
Driving Plate, 11 3/4″
Center Sleeve, M.T. #6
Dead Center (Cemented Carbide Tip) M.T. #4
Face Plate (Gap Type Only) 17 5/8″
Steady Rest 1 1/2″ – 5″
Carriage Micro Stopper
Thermal Relay (Dual Voltage Region Only)
Change Gear 72T
Installation Block
Tool Box
Grease Pump
Oil Gun
Box Handle 1/2″, 5/8″
Hexagon Handle
Spanners
Screw Driver
L-Wrench 3/8″
Repairing Paint
Testing Chart
Instruction Manual
Parts List
Mechanical Specifications:
Dimensions: 119″ x 37″ x 53.46″ H
Weight: approx. 5,050 lbs.
Contact us for special pricing and availability
FOB Factory