We are searching our extensive inventory for your item.

PMI 30″ Non-Ferrous Up-Cut Cold Saw, PMI-30

Shipping: Add to Cart to Calculate

Inventory #: 7891

Categories: , ,

Condition:

Type:

Brand:

Description

PMI 30″ Non-Ferrous Up-Cut Cold Saw, PMI-30

Inventory # 7891

Model: PMI-30

Description:

The PMI precision cut-off saws are designed to saw aluminum profiles quickly and accurately with a burr free mirror finish. The PMI-30 has many outstanding features that allow maximum productivity and also provide a safe work environment

Specifications:

Saw Blade Size: 30″ or 28″ x 2″ Bore

Saw Blade Speed: 1,800 RPM

Table Size: 32 1/4″ x 32 1/4″

Work Height: 33 7/8″

Motor: 15 HP

Standard Features:

15 HP Saw Motor: This strong drive system via 15 HP saw motor allows for maximum cutting force and chip removal. This additional power will also extend the life of the saw blade between regrinds

Up-Cut Design and Saw Blade Chamber: The PMI-30 is an up-cut saw. The saw blade is housed under the work table and travels through the work piece. This has several advantages such as, safety (less blade exposed during cut), chip removal and longer blade life

Precision Ground Work Table and Special Surface Coating: The work table is a ground surface and is coated with a special Chromate coating. This coating prevents marring the outside of your work piece

Material Clamping: The hydraulic clamping system has adjustable clamping pressure to prevent distortion of thin wall profiles. The top clamp holds the work piece on both sides of the saw blade to deliver a burr free cut-off part. This clamp is controlled by its own cylinder and has adjustment according to the size of the work piece

Saw Blade Feed: The saw blade feed is controlled via a hydraulic cylinder with full control of the feed rate. This will allow for accurate cuts and long blade life. In addition, the saw blade travel is controlled for fastest cycle time

Precise Micro-Drip Blade Lubrication System: The blade is lubricated via a micro-drip system. A small amount of lubricant is introduced to an air line at the point of discharge for control and economical distribution of the saw lubricant

Cutting Capacity: 9.45″ x 9.45″, 7.87″ x 15 3/4″, 5.9″ x 15 3/4″, 5.9″ x 20 7/8″, 4″ x 24″

Safety Machine Enclosure: The work table is guarded via a machine enclosure that is also monitored by a limit switch. The cover must be closed for the saw to cycle

Two Hand Cycle Start Activation: Dual start push buttons ensures that the operator has both hands free of the machine

Safety Limit Switch: Blade access door is protected via limit switch that will shut down the machine in the case of open door

Standard Equipment:

45° Material Stop for Miter Cut Position

One Blade

Tool Kit

Operating Manual

Mechanical Specifications:

Dimensions: 72 7/8″ x 40 1/2″ x 65″ H

Weight: approx. 1,496 lbs.

Contact us for special pricing and availability

FOB Factory

Can't Find What You Need? Give Us a Call: 1-800-394-4399