We are searching our extensive inventory for your item.

PMI 30″ Non-Ferrous Up-Cut Cold Saw, PMI-20 30

Shipping: Add to Cart to Calculate

SKU: PMI-20 30

Inventory #: 7888

Categories: , ,

Condition:

Type:

Brand:

Description

PMI 30″ Non-Ferrous Up-Cut Cold Saw, PMI-20 30

Inventory # 7888

Model: PMI-20 30

Description:

The PMI precision cut-off saws are designed to saw aluminum profiles quickly and accurately with a burr free mirror finish. The PMI-20 30 has many outstanding features that allow maximum productivity and also providing a safe work environment. The saw blade is mounted on a turntable to set up any miter cut in seconds, without moving the work piece to be cut

Specifications:

Saw Blade Size: 30″

Saw Blade Speed: 1,500 RPM

Table Size: 52 1/4″ x 26″

Work Height: 42″

Motor: 10 HP

Standard Features:

Miter Capability: The PMI-20 30 is equipped with a turn table that allows the set up of any miter cut in seconds. A positive lock of the table is released and then built in handles allow for easy turning of the saw blade approach. Several positive stops via locking pin allow for rapid and accurate set up of the angle to be cut. The work piece DOES NOT need to be moved from the 90° in-feed direction

10 HP Saw Motor: This strong drive system via 10 HP saw motor allows for maximum cutting force and chip removal. This additional power will also extend the life of the saw blade between regrinds

Up-Cut Design and Saw Blade Chamber: The PMI-20 30 is an up-cut saw. The saw blade is housed under the work table and travels up through the work piece. This has several advantages such as, safety (less blade exposed during cut), chip removal and longer blade life

Precision Ground Work Table with Special Surface Coating: The work table is ground surface and is coated with a special Chromate coating. This coating prevents marring the outside of your work piece

Material Clamping: The pneumatic clamping system has adjustable clamping pressure to prevent distortion of thin wall profiles. The top clamp holds the work piece on both sides of the saw blade to deliver a burr free cut-off part. The clamp is controlled by its own cylinder and has adjustment according to the size of the work piece. The clamping speed is also adjustable

Saw Blade Feed: The saw blade feed is controlled via a hydraulic cylinder with full control of the feed rate. This will allow for accurate cuts and long blade life. The hydraulic cutting also allows the machine to cut solid material with precision. In addition, the saw blade travel is controlled for fastest cycle time

Precise Micro-Drip Blade Lubricating System: The blade is lubricated via a micro-drip system. A small amount of lubricant is introduced to an air line at the point of discharge for control and economical distribution of the saw lubricant

Safety Machine Enclosure: The work table is guarded via a machine enclosure that is also monitored by a limit switch. The cover must be closed for the saw to cycle

Two Hand Cycle Start Activation: Dual start push button ensures that the operator has both hands free of the machine

Safety Limit Switch: Blade access door is protected via limit switch that will shut down the machine in the case of open door

Standard Equipment:

One Blade

Tool Box

Mechanical Specifications:

Dimensions: 65 1/3″ x 55″ x 87″ H

Weight: approx. 2,860 lbs.

Contact us for special pricing and availability

FOB Factory

Additional information

Weight 3060 lbs

Can't Find What You Need? Give Us a Call: 1-800-394-4399