Description
Betenbender 6′ x 70 Ton Hydraulic Press Brake
Inventory # 9212
Model: 6′-70
Specifications:
Overall Width: 45″
Width of Bed: 2″
Overall Length: 87″
Distance Between Housing: 54 1/2″
Weight: approx. 8,000 lbs.
Standard Features:
Simple and Flexible Controls: Use either a convenient multi-switch control panel or a 3-position fully guarded foot switch
Accuracy: Every Betenbender machine is thoroughly inspected and tested. Parallelism is maintained between bed and ram, or at preset angle, by using precise automatic leveling controls. Parallelism is maintained at +/- 0.002″ in low spped. The ram bottom reversal point is controlled by precise limit switches referenced off the bed. This isolates housing deflections which can interfere with accuracy. The side situated handwheel sets the bottom limit of the ram stroke. Micrometer adjustment on the control end allows for tilting or paralleling of the ram. A bed referenced control monitors the actual distance between ram and bed, assuring repeatability independent of die wear or end plate deflection
Versatility: Betenbender’s Press Brakes have long, full tonnage stroke; adjustable length and selectable speed combinations; adjustable height for short stroke. Two-speed is standard; three-speed with infinitely adjustable low speed is optional. This option prevents sudden whip up of the work during bending operations
Maintenance: Clevis mounted cylinders eliminate cylinder binding reducing the possibility of oil leaks. Pins and bushings do not rotate under load, resulting in much less wear the competitive products
Easy Hydraulic System Maintenance: The manifold assembly saves space and makes it easy to replace many components. The convenient work height makes the job easier
Convenient Settings: Readout reads in increments of 0.001 inch allows recorded settings of closed heights
Standard Components: The control system components, micro switches, clamp-type backgauge, hydraulic fluid and filter cartridges are all standard equipment, making routine maintenance easier
Flexibility: 2-Speed ram is electrically controlled. It lets you shift to a lower speed before coming into contact with sheet metal
Control: The ram stops at the point of reference and self-levels on every stroke. Main control cabinet enclosures are mounted on the side frame containing magnetic, non-reversing motor, starter and 110/120v control circuit
Safety and Reliability: The control system operates at 110/120v using a minimum of circuitry. The system operates predominantly with American made electronics and American made motors
Durability: All steel end frames, ram and bed
Electrical Equipment: Meets requirements of NFPA 79. It includes drip proof, continuous duty 45ºC ambient hydraulic pump motor wired for 208-230/460v 3 phase, 60 hertz, others optional
Ram Level: Is accomplished by two hydraulic systems. One for each cylinder, which keeps them parallel. Self-levels at bottom of each stroke even if hydraulic system is out of adjustment
FOB Factory