Description
Apex 37″ Two Head Belt / Disc Grinding, De-Burring Machine with Belt Cleaning Unit
Inventory # 7397
Model: 1037M-DSc
Made in Taiwan
Details:
The 1037M-DSc Sander is a workhorse with a contact drum on the 1st head and the 2nd head consisting of a row rotating discs with oscillation.
This 37” wide double-head machine allows the user the ability to handle a wide variety of applications including stock removal, calibrating, polishing, de-burring of edges and interior holes of a variety of steel, alloys and or composites.
Great for de-burring edges and providing a radius edge on exterior edges, interior holes and getting material ready for coatings/paint adhesion in one pass.
Specifications:
1st Sanding Station/Head: Contact Drum
Contact Drum: 6″ (50-55 durometer)
Sanding Belt: 37” x 60”
Contact Drum pressure adjustment control with a easy turn of a handle
Heavy duty high efficiency dust hood
Independent Motor: 20 HP @ 230 v /3 ph or 460 v / 3 ph
2nd Sanding Station/Head: Variable Speed Oscillated Disc Head
Sanding pressure adjustment easily controlled with a simple turn of a switch to raise or lower disc station.
Digital Readout for referencing the height of disc media to the conveyor belt
Reversing of disc direction to allow operator to easily change to a finer abrasive or to a coarser abrasive simply turning the selector switch on the control panel
Heavy duty high efficiency dust hood
Independent main motor: 2.2 KW
Standard Features:
Heavy-Duty welded cage type frame, made of carbon steel
Lifting-lowering screws mounted on long distance for more rigidity and stability
Abrasive belts oscillation by means of electronic photocell sensor, including sensitivity trimmer adjustment
Oscillation Brush control on stroke
High efficiency exhaust dust hood system
Idle table rollers support on in-feed
Rubber covered hold down rollers 50 shores
Machined working table in pre-welded steel
Motorized table lifting including fine adjustment, made on 4 precision screws on double support
Table lifting-lowering system completely electrically controlled with manual adjustment wheel for fine adjustment
Heavy duty rubber conveyor belt
Variable feed speed with easy turn of a dial setting at control panel in metric and/or standard
Electronic digital display for working thickness; resolution 0.001″
Programmable digital thickness indicator
Air-operated disc brake system
Centralized control panel
Hour meter
Equipment Included:
*Belt Cleaning Unit:
Cleaning device and sticky style conveyor belt, scuffs the special type conveyor belt, allowing the user to run small parts
Electrical Plant:
Centralized control panel for operator ease of control and efficiency
Analog amp meter, for each motor, on main control cabinet
Table lifting-lowering thickness system electrically controlled with digital thickness readout.
AUTOMATIC star-delta starter, for each abrasive belt motor
Independent overload protections
Machine wired at 460/3/60 Full load amp is 42 FLA (84 FLA if wired at 230/3/60)
Safety:
In-feed front emergency swinging bar to aide in preventing over-thick or double stacked parts from entering into machine and causing damage to first head contact drum and also to help in protecting machine operator from inadvertently feeding over-thick parts
Rear and front red emergency push button
Automatic brake on abrasive belt and brush head motors activate if safety sensors are tripped
Ceramic tipped sensors for abrasive belt mis-track shut off
Automatic brake system applied if abrasive belt breaks apart
Pneumatic Plant:
Centralized independent pneumatic control cabinet; dust proof
Pneumatic air filter with automatic water-drain system
Pneumatic plant working without lubrication
Compressed air pressure 6 bar
Initial Load of Suggested Abrasives for Disc Stations
(3) 3M 37″ x 60″ Sanding Belts
Mechanical Specifications:
Overall Dimensions: 72″ L x 64″ W x 88″ T
Overall Shipping Weight: approx. 4,500 lbs.
Contact us for special pricing and availability
FOB Factory