Description
Amada Marvel 31 1/4″ x 37 1/2″ Manual Vertical Tilt Frame Band Saw, VT7995M (Formerly 800M)
Inventory # 7793
Model: VT7995M
Made in USA
Specifications:
Capacity:
Nominal:
Rectangular: 31 1/4″ x 37 1/2″
Round: 31 1/4″
@ 45° Right:
Rectangular: 31 1/4″ x 25 1/2″
Round: 25 1/2″
@ 60° Right:
Rectangular: 31 1/4″ x 17 1/2″
Round: 17 1/2″
@ 45° Left:
Rectangular: 31 1/4″ x 24 3/4″
Round: 24 3/4″
@ 60° Left:
Rectangular: 31 1/4″ x 16″
Round: 16″
Speed Range: 60 – 400 FPM
Feed Force: 0 – 350 lbs.
Table Height: 52″
Blade Size: 300″ x 2″ x .063″
Blade Guides: Combination Roller Bearing / Carbide
Blade Tension: 32,000 PSI
Auto Bar Feed: 72″ Servo Driven
Hydraulic Pump: 5 HP
Hydraulic Tank: 10 Gallons
Motor: 15 HP
Standard Features:
Blade Drive: Electric with sensor-less vector control for smooth acceleration and full torque
Tilting Column: For miter cutting up to 60° left and right of vertical. Variable speed, inverter driven, electronic tilt – includes encoder feedback and touch screen display and control, for precision miter positioning. Electrically powered, chain driven, with encoder feedback and Marvel PC3 controller
Touch Screen Control: Blade speed, feed pressure and angles are selected using the convenient, operator friendly touch screen control
3° Canted Column or Non-Canted Column: Standard 3° forward approach angle for increased efficiency in cutting of structural materials
Feed Force: Direct Force Sensing Electric Ball Screw Feed 0 – 350 lbs; column travels on recirculating linear ball ways. Feed pressure can be automatically set when material is selected
Jammed Blade Protection: Automatically senses resistance as the column returns and stops to prevent blade damage
Blade: One Welded-Edge Band is furnished with each machine as part of standard start-up supplies
Blade Guides: Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self tensioning design
Blade Tension: Hydraulically controlled, 32,000 PSI maximum. Machine equipped automatic blade break/blade stall shut-off switch
Upper Blade Guide Arm: Hydraulically positioned and locking, controlled by selector button on the touch screen
Vises: Hydraulic, full stroking with 12″ x 20″, 60° face plates. Optional variable vise pressure available as well as an optional second machine vise
Coolant System: Built-in with Flood system, available with Drop Lubrication system, includes chip pan with manual hand crank type chip conveyor. A flushing hose is included to wash away chips from hard to reach places reducing clean-up time
Work-Rest Rollers: Two turned ball bearing rollers, one on each side of the machine bed
Standard Left-to-Right Work Entry: Opposite Hand or Right-to-Left work entry available
Controls: IEC fuses disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator’s control panel and machine lighting circuits. PLC control and drives mounted in moisture tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L. Labeled
FOB Factory – Contact us for Pricing and Availability