SHARP SUPER MINI-MILL (NEW)

MODEL # SV-2412S 

INVENTORY # 1545

SPECIFICATIONS

10,000 RPM Spindle – CAT 40

7.5/10 HP Spindle Motor

Travel X, Y, Z Axes: 24" x 12" x 18"

Rapid Feed Rate: 1181 ipm

All Box Ways

FANUC Oi-Mate "C" Control with Remote MPG

Fanuc 2-Axes Tool Path Graphic

Rigid Tapping

16 Pocket Automatic Tool Changer

Flood Coolant System

Full Metal Enclosure

Automatic Lubrication System

Lubrication Failure Alarm

Halogen Work Light

Weight: 6,100 lbs.

Wired 220V, 3 Phase, 60 Hz

Manual Assist Conversational Programming

CAPACITY:

Travel (X,Y,Z) 24"x12"x18" (610x305x460mm)

Table Size 27.5"x12"

Table T-Slot Size 0.63" wide (16mm)

Maximum Table Load 770 lbs (350kg)

Spindle Center to Column (throat) 16.3" (415mm)

Spindle Nose to Table Surface 2.8"-20.8" (70-530mm)

SPINDLE:

Taper CAT-40

Spindle Motor 7.5/10hp

Spindle Speed 10,000 RPM

WAYS AND BALLSCREWS:

Way Construction Hardened & Ground Box Ways

Ballscrew Diameter, Pitch 1.26" (32mm), .394" (10mm)

Ballscrew Grade C-3 

AUTOMATIC TOOL CHANGER:

Tool Capacity 16 Tools

ATC Type Carousel Type

Selection Method Bi-directional

Tool Change Time 6.5 Seconds

Tool Diameter 3.9" (100mm)

FEED RATES:

Rapid Traverse (all 3 axes) 1181 IPM (30M/Min)

Cutting Feed Rate (max.) 393 IPM (10M/Min)

Axes Motor (X, Y, Z) 2.4, 2.4, 3.4 HP

ACCURACY:

Positioning +/- .0002" (0.005mm)

Repeatability +/- .00012" (.003mm)

MISCELLANEOUS:

Approximate Weight 6,100 lbs.

Dimension -Machine (L x W x H) (L) 78"x (W) 73.5"x(H) 92"

Dimension – Front (W xH) 24" x 36" (0.6m x 0.9m)

Dimensions – Side Door ( W x H) 24" x 27" (0.6m x 0.7m)

Power Requirements 220V / 3 phase / 60Hz / 15 KVA

Air Requirements 100 psi (7 scfm)

CALL FOR PRICING