COSEN SEMI-AUTOMATIC MITER CUTTING HORIZONTAL BANDSAW

INVENTORY # 3755

MODEL SH-500

S/N  951051

MACHINE SPECIFICATION:

MITER CAPACITY: 60° MAXIMUM

MAXIMUM CUTTING CAPACITY:

ROUND

90° = 13"

45° = 11.5"

30° = 8.7”

SQUARE      

90° = 11” X 11"

45° = 10.5” X 10.5”

30° = 8.7” X 8.7”

RECTANGLE

90° H X W = 11” X 18"

45° H X W = 10.5” X 10.5”

30° H X W = 8.7” X 8.7”

MACHINE VISE:    FULL STROKE HYDRAULIC

BLADE:        

SPEED: (4) 75, 117, 166, 247FPM

SIZE: 1" X 13'7" X .035"

CLEANING: POWERED WIRE BRUSH

GUIDES: CARBIDE

COSEN MODEL MH330ER:

MOTOR:

SAW BLADE: 2 HP

COOLANT: 1/8 HP

GROSS WEIGHT: 1,760 LBS.

WORK BED HEIGHT: 32”

POWER: 220V, 3 PH, 60 HZ

FLOOR SPACE: 83" X 65" X 55"H

MACHINE FEATURES:

Structure:

The swivel saw head allows the user to cut at any angle between 90° (straight cut) and 60° (miter cut). The precision pivot system facilitates easy and accurate adjustment for angle cuts. It has a protractor and pointer in clear view and away from any chips covering the numbers and requires no tools to make angle changes.

Rigid and heavy-duty pivot and trunnion insure long machine life.

Blade Drive:

The standard blade speed control provides four blade speeds (75 to 247 fpm) that can be easily changed with a toggle clamp device to accommodate all types of materials.

Blade Guidance & Lubrication System:

Carbide guides securely guide the blade during the cutting cycle. The carbide is relieved so that coolant can both cool and lubricate the blade during the cut. Bearing guides eliminate blade stress by pre-aligning the blade before it enters the carbide guides.

Cast iron guide arms are rigidly supported by a large, heavy-duty cast iron dovetail to assure straight cuts and eliminate vibration for longer blade life.

Blade tension device insures proper blade tension for quality cuts and longer blade life.

Integral coolant system

Synchronized blade brush removes the chips from the blade, maximizing productivity and extending blade life.

Control & Automation:

The operator’s control station located on the front right side of the saw is convenient and user friendly. All operator controls are positioned on the top of the control box and clearly labeled for ease of operation. The electrical components are located inside the control box with the main lockout disconnect on the front of the control box for safety and easy maintenance.

Material Feeding & Clamping:

In addition to the sturdy cast work table, an 18” solid discharge table with coolant return and a built-in adjustable material stop are standard features that make repeated cutting easy.

The Hydraulic vise provides rapid vise jaw movement to secure or release the work piece and can be easily operated from either the front or rear of the machine. 

Safety:

All exposed electric wiring and hydraulic circuit are protected by conduits.

Alert Orange  for blade guards and access doors.

EQUIPMENT INCLUDED:

Hydraulic vise

Hydraulic Head Lift

Adjustable material stop

Additional flushing hose for cleaning

Bi-metal saw blade

60” Roller Conveyor

66” Roller Conveyor

Operation & parts manual

CLEANED, CHECKED AND IN VERY GOOD CONDITION

SPECIAL PRICE:    $ 7,295.00

FOB Our Floor